Insight

 

OCMI OPEN HOUSE DEDICATED TO VIAL PROCESSING TECHNOLOGY

OCMI-OTG will be glad to open the doors of its premises of Milan during the month of April 2019 to introduce the last upgrades applied to the vial forming machine type FLA-20S.


The 20 stations vial forming machine, with continuous rotation according to OCMI tradition and maximum output around 3000 pcs/hour for 2R vials, is now equipped with newly developed pre-forming and main forming stations where plungers and rollers movement is driven by servo-motors.

Main purpose is to assure the best precision and quality of the mouth forming process and make the operator’s job easier with the possibility to set the main parameters for tools motion from the touch-screen integrated in machine cabinet.

The main parameters to be set from machine cabinet are the initial and final positions of rollers and plungers, the entry/exit acceleration of the rollers and plungers and entry speed of plungers.

The vial forming station of FLA-20S machine includes two independent stations equipped with one roughing roller each for the initial preparation of the vial shoulders. The main forming operation is then performed by the two new servo-controlled stations equipped with two rollers and one plunger.

Plungers are internally lubricated in order to keep the best cleaning conditions of the machine during operation.

The same development with servo-control of tooling stations can be applied to OCMI droppers and dental cartridges forming machines.


The vial forming machine introduced during OCMI Open House of April 2019 will be equipped with camera inspection system OPTIVIAL for dimensional control, recently developed by increasing the number of vial pictures to be taken in order to improve the precision of the average dimensional values.

The back-light box of OPTIVIAL has been renovated with a new covering device equipped with two small cooling fan in order to minimize the risk of overheating of the lighting device.


FLA-20S machine will be connected with the after-forming line LF-520, traditionally manufactured by OCMI French factory of Moderne Mecanique.

The line will be equipped with cooling fans, calibration section including control of total lenght and internal mouth diameter and printing station.

The calibration station is equipped with new generation electronic gauges managed by new dedicated panel.

The line presented in April will be equipped with standard electrical annealing lehr with vials conveying through racks following the same concept of ampoule oven. This lehr can process vials with minimum total lenght of 35 mm and assure an absolute removal of strains from glass surface thanks to the optimal distribution of heating elements along the three oven sections.

The alternative new version of vial annealing lehr developed in OCMI Italian headquarters, is fed by feeding manipulator with six mechanical grippers picking the vials from cooling conveyor and placing them in horizontal position on drilled metal trays. The pick-place manipulator allows to reduce the total lenght of vials to be processed since the grippers are adjustable according to vial height.

LF-520 line will be working with traditional packing section with mechanical vial pushing device inside the box.

The optional equipments Roboglass (automatic tube loader) and PM-V (automatic vial packing machine) won’t be available during OCMI Open House but any type of technical documentation and videos will be put at complete disposal of guests.

From April 1st 2019 OCMI will be glad to welcome all worldwide visitors potentially interested in new developments applied to tubular glass vials processing technologies.